Construction Projects
Location: Westminster, Colo.
Client: City of Westminster
Design-build services for a new microfiltration water treatment facility utilizing enhanced conventional treatment with plate settlers prior to the microfiltration membrane units.
Location: Center, N.D.
Client: Minnkota Power Cooperative
Preliminary engineering, detailed design, field engineering support and startup services for air quality control retrofits in Grand Forks, N.D., for Minnkota Power Cooperative.
Location: Marietta, Ga.
Client: Lockheed Martin Aeronauticals
Design-build services for Lockheed Martin's robotics coating operations in Marietta, Ga., including overall project management, facility design, construction, commissioning and turnover of the 7,300-SM facility for application of low observable coatings.
Location: Kingsville, Texas
Client: Naval Facilities Engineering Command (NAVFAC) Atlantic
Design-build services for a jet engine test cell for NAVFAC in Kingsville, Texas.
Location: Zeeland, Mich.
Client: Mirant Co.
Design and construction of two simple-cycle combustion turbines and a combined-cycle combustion turbine plant. The Zeeland Facility is a natural-gas fired power plant.
Location: Philadelphia
Client: Sunoco Inc.
EPC services to return a hydrocracker unit and hydrogen plant to service at Sunoco's Philadelphia refinery.
Location: Groton, Conn.
Client: Electric Boat Corp.
The Controlled Industrial Facility (CIF) supports maintenance and repair services for naval nuclear powered submarines located at Groton, Conn., on an Electric Boat facility.
Location: Washington, D.C.; Jeffersonville, Ind.; Baltimore; Pomona, Calif.; Phoenix, Ariz.
Client: U.S. Census Bureau/Department of Commerce
Design-build and general contracting services for four geographically separate but uniquely similar facilities for the Census Bureau/Department of Commerce (DOC).
Location: Borger, Texas
Client: ConocoPhillips
Engineering, procurement and construction services for ConocoPhillips' Borger, Texas, refinery's new amine absorption unit. Also included engineering and construction for a new hydrogen compressor.
Location: Ponca City, Okla.
Client: ConocoPhillips
Design-build services for the Outside Battery Limits (OSBL) portion of the of the Low Sulfur Gasoline (Clean Fuels) Project in Ponca City, Okla. Also construction services for the Inside Battery Limit (ISBL).
Location: Monroe, N.C.
Client: Tyson Foods Inc.
Design-build reworking of an existing chicken deboning operation in Tyson’s Monroe, N.C., plant on a turnkey basis, including a utility analysis and modification, facility layout, equipment design and procurement, installation and startup services.
Location: Kirtland Air Force Base, N.M.
Client: U.S. Army Corps of Engineers, Albuquerque District
Design-build services for a new two-story facility relocating the Air Force Research Laboratory Space Vehicles Battlespace Environment Laboratory to Kirtland Air Force Base in New Mexico.
Location: Olathe, Kan.
Client: City of Olathe
Hydrogeologic investigation, site location and design-build services for a 7-MGD horizontal collector well for the city of Olathe, Kan., including a 16-foot inside diameter caisson, four horizontal lateral well screens and a pump station.
Location: Ponca City, Okla.
Client: ConocoPhillips
Engineering, procurement and construction (EPC) services for the Ultra-Low Sulfur Diesel project at the Ponca City, Okla., refinery of ConocoPhillips.
Location: Texas Medical Center, Houston
Client: Thermal Energy Corp.
Architectural, engineering, procurement and construction services to Thermal Energy Corp. (TECO) for the initial phase of a 50-year master plan, providing on-site power generation, steam and chilled water to buildings within the Texas Medical Center complex in Houston.
Location: Meridian, Miss.
Client: Naval Facilities Engineering Command (NAVFAC) Atlantic
Design-build services for a jet engine test cell for NAVFAC Atlantic in Meridian, Miss.
Location: Thomson, Ill.
Client: Xyrofin Inc.
Design, procurement, construction and startup for a $35 million lactitol production facility.
Location: Clarksdale, Miss.
Client: MEP Clarksdale Power
Engineer-procure-construct (EPC) services for the 320-MW Clarksdale simple cycle project, which utilizes four GE Frame 7EA combustion turbines, including project development and full EPC services for the power plant and the substation through startup and commissioning.
Location: Kansas City, Kan.
Client: Procter & Gamble
Layouts, pipe routing, building specifications, foundation design, electrical design and tie-in requirements for the replacement of boilers at an existing manufacturing facility. Also included equipment purchase, construction management, and commissioning, startup and training for the new boilers.
Location: Moberly, Mo.
Client: Associated Electric Cooperative Inc. (AECI)
An environmental controls retrofit at Thomas Hill Energy Center in Moberly, Mo., for Associated Electric Cooperative, including detailed design and engineering for the retrofit selective catalytic reduction (SCR) systems for all three units, new low NOx burners, new air heaters and modifications to the existing electrostatic precipitators on Unit 3.
Location: Fort Worth, Texas
Client: Lockheed Martin Aerospace Co.
The Radar Cross Section facility is a test facility for the Joint Strike Fighter’s special coatings. The setting for testing the aircraft must simulate the plane’s environment in a combat situation.